SERVICING.

TM 55-4920-373-14&P

3-22. SERVICING.

3-23. To service the test stand follow instructions listed in tables 3-4 and 3-5.

TABLE 3-4. SERVICING DAILY

COMPONENT

AND

SYSTEM

LOCATION

REQUIREMENT

Battery

Open battery caps, replenish

Electrical

with water

(item 7, figure 3-4)

Ignition Wires

Check for proper connections,

tighten if necessary

(See figure 3-2)

Fluid Reservoir

Hydraulic

Check that reservoir is full, re-

(item 5, figure 1-3)

plenish if necessary (table 3-2)

Engine

Check dip stick for oil level.

Crankcase

Replenish if necessary (table

(See figure 3-2)

3-1) and (paragraph 3-24)

Fuel strainer

Check for foreign matter and

(figure 3-2)

water

Miscellaneous

Fuel tank

Check gas gage for amount,

refill if necessary. (paragraph

3-8)

Tires

Check tire pressure, refill

to proper pressure if necessary

Access Door Hinges

Check for free movement,

(figure 1-4)

lubricate if necessary (table

3-2) and (paragraph 3-5, a.)

Draw Bar

Check for free movement,

(figure 1-4)

lubricate if necessary (table

3-2) and (paragraph 3-22)

3-24. LUBRICATION SERVICING INSTRUCTION. For proper care of lubricant containers, replace their

respective covers and store in a clean, dry area. Keep all foreign matter out of lubricants, exercising

care by not leaving cans opened.

TABLE 3-5. LUBRICANTS

TEMPERATURE RANGE (Fahrenheit) (Military Specification)

Above +32 to +40

+40 to -10

0F to -65

LOCATION

Engine Oil

SAE 30

SAE 10

Engine Crankcase

Air Cleaner

(MIL-L-2104)

Sub Zero

MIL-L-10295

2190

2110

2075

Flow Indicator

Draw Bar Assembly

2075

2190

2110

Door Hinges and Latches

2075

2190

2110

3-16