TM 5-2350-378-23&P
0012
FRONT CORNER (LEFT OR RIGHT) RAISES IN SPRUNG, BUT NOT UNSPRUNG MODE - Continued
CONDITION/INDICATION
Is transducer T-1 hydraulic pressure between 3,400-3,550 psi (23,788-24,477 kPa)?
DECISION
YES - Go to Step (12).
NO - Go to Step (11).
STEP
11.
Perform suspension control relief valve adjustment using HDC.
a.
Stop engine; relieve hydraulic pressure.
b.
Reset all HDC solenoid valves by selecting RESET VALVES button (Figure 7, Item 5) on HDC control
box.
1
2
3
4
5
T00112HDC
Figure 7. Hydraulic Diagnostic Center (HDC) Control Box.
NOTE
If left corner of vehicle will not raise, perform this adjustment at relief valve 3L and actuate
left-hand SUSPENSION CONTROL lever. If right corner of vehicle will not raise, perform
this adjustment at relief valve 3R and actuate right-hand SUSPENSION CONTROL
lever.
c.
Port 3R RELIEF VALVE: Using LINE UP or LINE DOWN button (Figure 7, Item 3), select V15 on HDC
display (Figure 7, Item 2).
03/15/2011Rel(1.8)root(tswp)wpno(T00010)
