TM 5-2350-378-23&P
0015
HYDRAULIC OIL OVERHEATS - Continued
1
2
3
4
T01364HDC
Figure 45. Hydraulic Diagnostic Center (HDC) Control Box.
c.
No. 4 Left Actuator, No. 1 Left Actuator, and No. 1 Right Actuator manual procedure.
(1)
Stop engine; relieve hydraulic pressure.
(2)
Disconnect SPNSN UNIT-9 hose (Figure 46, Item 4) from elbow (Figure 46, Item 3) on port 9
(Figure 46, Item 1) of No. 1 right actuator (Figure 46, Item 7).
(3)
Cap elbow (Figure 46, Item 3).
(4)
Disconnect CORNER SPNSN UNIT-2 hose (Figure 46, Item 5) from elbow (Figure 46, Item 6) on
port 2 (Figure 46, Item 8) of No. 1 right actuator (Figure 46, Item 7).
(5)
Plug hose (Figure 46, Item 5).
(6)
Connect hose (Figure 46, Item 4) to elbow (Figure 46, Item 6) on port 2 (Figure 46, Item 8).
(7)
Catch oil in a graduated 2 gal. (7.6 L) container.
(8)
With suspension in SPRUNG mode, start engine and check for leakage from ports 7 (Figure 46,
Item 10), 7B (Figure 46, Item 9) and 17 (Figure 46, Item 2).
3
4
1
1
2
10
8
7
8
9
6
T01365HDC
5
Right-Hand Corner Actuators.
Figure 46.
03/15/2011Rel(1.8)root(tswp)wpno(T00013)
