TM 5-2350-378-23&P
0038
DISASSEMBLY
CAUTION
Disassembly should be performed in a clean environment and protective dust covers or
caps should be installed on all openings to prevent contamination. Dirt can damage parts
and cause malfunctions.
When securing aft manifold in vise, exercise extreme care not to mar any surfaces or
damage components.
1.
Remove adapter (Figure 2, Item 10), adapter (Figure 2, Item 9), adapter (Figure 2, Item 14), O-ring
(Figure 2, Item 6), O-ring (Figure 2, Item 15), two adapters (Figure 2, Item 12), two O-rings (Figure 2, Item 11),
plug (Figure 2, Item 8), O-ring (Figure 2, Item 7), adapter (Figure 2, Item 5), O-ring (Figure 2, Item 6), adapter
(Figure 2, Item 16), and O-ring (Figure 2, Item 15) from aft manifold (Figure 2, Item 13).
2.
Remove four two-way (NO) valves V4, V6, V7, and V8 (Figure 2, Item 1), one two-way (NC) valve
(Figure 2, Item 17), five packing retainers (Figure 2, Item 3), five O-rings (Figure 2, Item 4), five packing
retainers (Figure 2, Item 3), and five O-rings (Figure 2, Item 2) from aft manifold (Figure 2, Item 13). Discard
O-rings and packing retainers.
1
2
3
5
4
3
10
9
6
2
17
6
3
8
4
7
3
1
1
2
2
3
3
4
4
3
3
16
11
15
15
14
13
11
12
3
4
3
2
1
M0033HDC
Figure 2. Hydraulic Diagnostic Center (HDC) Manifold Disassembly.
END OF TASK
03/15/2011Rel(1.8)root(maintwp)wpno(M00010)
