TM 5-2350-378-23&P
FIELD MAINTENANCE
HULL/EJECTOR INTERFERENCE REPLACEMENT
INITIAL SETUP:
Materials/Parts (cont.)
Tools and Special Tools
Tool Kit, General Mechanic's: Automotive
Bolt, Machine (WP 0055, Table 1, Item 23)
(WP 0054, Table 1, Item 7)
Qty: 4
Lifting Device, Minimum Capacity 325 lb (148 kg)
Nut, Self-Locking (WP 0055, Table 1, Item 8)
Qty: 1
Materials/Parts
Lubricating Oil, Engine
Personnel Required
(WP 0053, Table 1, Item 1)
Construction Equipment Repairer, 91L
Equipment Condition
Hydraulic pressure relieved (WP 0004)
Rear floor plates removed (TM 5-2350-262-20)
WARNING
Ejector cylinder weighs 325 lb (148 kg). Support ejector cylinder before disconnecting. Failure
to comply may result in severe injury to personnel.
CAUTION
Ensure ejector cylinder end is securely supported when replacing bracket to avoid damaging
engine and transmission hoses and fittings.
0042-1
03/15/2011Rel(1.8)root(maintwp)wpno(M00019)