TM 5-2350-378-23&P
0011
EJECTOR DOES NOT EXTEND OR RETRACT - Continued
b.
Have assistant actuate EJECTOR CONTROL lever (Figure 23, Item 1) to move ejector forward 3/4 of
full travel.
1
T00927HDC
Figure 23.
Ejector Control Lever.
c.
Stop engine and relieve hydraulic pressure.
d.
Close main ejector valve (V1) on HDC primary manifold.
e.
Using LINE UP or LINE DOWN button (Figure 24, Item 2), select V1 on HDC display (Figure 24, Item 1).
f.
Close V1 on HDC display (Figure 24, Item 1) by selecting CHANGE POSITION button
(Figure 24, Item 3) on HDC control box.
g.
Have assistant start engine and hold EJECTOR CONTROL lever in BACK position for one minute.
h.
Mark position of ejector at side of hull and continue to hold valve lever in BACK position for one more
minute.
i.
Check position of ejector while still holding valve lever in BACK position.
j.
If ejector has moved forward more than 0.5 in. (13 mm), the ejector cylinder is leaking excessively.
k.
If cylinder moves aft more than 0.5 in. (13 mm), solenoid valve V1 on HDC primary manifold valve is
leaking.
l.
Open main ejector valve; by using LINE UP or LINE DOWN button (Figure 24, Item 2), select V1 on HDC
display (Figure 24, Item 1).
m.
Open V1 on HDC display (Figure 24, Item 1), by selecting CHANGE POSITION button
(Figure 24, Item 3) on HDC control box.
03/15/2011Rel(1.8)root(tswp)wpno(T00009)
