TM 5-2350-378-23&P
0012
FRONT CORNER (LEFT OR RIGHT) RAISES IN SPRUNG, BUT NOT UNSPRUNG MODE - Continued
WARNING
Do not operate ejector when personnel are in bowl. Do not work in bowl unless
ejector lock is engaged. Failure to comply may result in severe injury or death to
personnel.
Do not stand or work in bowl area unless ejector lock is engaged. Do not stand in
bowl to observe roller guide travels. Failure to comply may result in severe injury or
death to personnel.
When folding dozer blade, work on blade latches from side of vehicle only. Do not
stand in front of dozer blade while retracting ejector. Failure to comply may result in
severe injury or death to personnel.
b.
Stop engine; relieve hydraulic pressure.
c.
Disable ejector by manually closing ejector inhibit ball valve V23 (Figure 20, Item 2) on DCV bank.
1
2
T00128HDC
Figure 20. Directional Control Valve (DCV) Bank.
d.
Using LINE UP or LINE DOWN button (Figure 21, Item 3), select V1 on HDC display (Figure 21, Item 2).
e.
Close V1 on HDC display (Figure 21, Item 2) by selecting CHANGE POSITION button
(Figure 21, Item 4) on HDC control box.
f.
Ensure right main hydraulic pressure inhibit valve V21 (Figure 20, Item 1) is fully opened.
g.
Have assistant start engine and allow engine to idle (750-800 rpm).
03/15/2011Rel(1.8)root(tswp)wpno(T00010)
