TM 5-2350-378-23&P
0012
FRONT CORNER (LEFT OR RIGHT) RAISES IN SPRUNG, BUT NOT UNSPRUNG MODE - Continued
c.
Using LINE UP or LINE DOWN button (Figure 16, Item 3), select V1 on HDC display (Figure 16, Item 2).
d.
Close V1 on HDC display (Figure 16, Item 2) by selecting CHANGE POSITION button
(Figure 16, Item 4) on HDC control box.
e.
With SPRUNG/UNSPRUNG lever in SPRUNG, have assistant move left hand SUSPENSION CONTROL
lever to RAISE, while at same time, holding EJECTOR CONTROL lever in BACK.
f.
Observe transducer T-4 hydraulic pressure on HDC display (Figure 16, Item 1).
1
2
3
4
5
T00121HDC
Figure 16. Hydraulic Diagnostic Center (HDC) Control Box.
03/15/2011Rel(1.8)root(tswp)wpno(T00010)