TM 5-2350-378-23&P
0012
FRONT CORNER (LEFT OR RIGHT) RAISES IN SPRUNG, BUT NOT UNSPRUNG MODE - Continued
STEP
18.
Perform solenoid valve V2/V3 flow test using HDC.
a.
Reset all HDC solenoid valves by selecting RESET VALVES button (Figure 13, Item 1) on HDC control
box.
1
T00118HDC
Figure 13. Hydraulic Diagnostic Center (HDC) Control Box.
WARNING
Do not work under vehicle unless hull is on jack stands and apron lockpins are installed.
Failure to comply may result in severe injury or death to personnel.
NOTE
Have suitable container ready to catch oil.
b.
Disconnect right forward manifold line 11 for solenoid valve V2.
c.
Disconnect left forward manifold line 11 for solenoid valve V3.
03/15/2011Rel(1.8)root(tswp)wpno(T00010)