TM 5-2350-378-23&P
0012
FRONT CORNER (LEFT OR RIGHT) RAISES IN SPRUNG, BUT NOT UNSPRUNG MODE - Continued
g.
If pressure is not within limits adjust main relief valve 13L (Figure 17, Item 4) by loosening jam nut
(Figure 17, Item 3) and rotating adjustment screw (Figure 17, Item 2) clockwise to increase pressure;
counterclockwise to decrease pressure.
h.
When hydraulic pressure is within limits, tighten jam nut (Figure 17, Item 2).
i.
Stop engine; relieve hydraulic pressure.
j.
Repeat previous steps for main relief valve 13R (Figure 17, Item 1) using right-hand SUSPENSION
CONTROL lever and observe transducer T-3 hydraulic pressure on HDC display (Figure 19, Item 1).
1
2
3
4
T00123HDC
Figure 17. Main Relief Valve.
k.
Stop engine; relieve hydraulic pressure.
l.
Enable ejector by manually opening ejector inhibit ball valve V23 (Figure 18, Item 1) on DCV bank.
1
T00125HDC
Figure 18. Directional Control Valve (DCV) Bank.
03/15/2011Rel(1.8)root(tswp)wpno(T00010)
