TM 5-2350-378-23&P
0013
FRONT CORNER (LEFT OR RIGHT) RAISES IN UNSPRUNG, BUT NOT SPRUNG MODE - Continued
d.
Read transducer T-10 hydraulic pressure on HDC display (Figure 4, Item 1).
e.
Using LINE UP or LINE DOWN button (Figure 4, Item 3), select V3 on HDC display (Figure 4, Item 2).
f.
Open V3 on HDC display (Figure 4, Item 2) by selecting CHANGE POSITION button (Figure 4, Item 4)
on HDC control box.
g.
For front right:
(1)
Using LINE UP or LINE DOWN button (Figure 4, Item 3), select V2 on HDC display
(Figure 4, Item 2).
(2)
Close V2 on HDC display (Figure 4, Item 2) by selecting CHANGE POSITION button
(Figure 4, Item 4) on HDC control box.
h.
Have assistant keep SPRUNG/UNSPRUNG lever in UNSPRUNG mode.
i.
Read transducer T-11 hydraulic pressure on HDC display (Figure 4, Item 1).
j.
Using LINE UP or LINE DOWN button (Figure 4, Item 3), select V2 on HDC display (Figure 4, Item 2).
k.
Open V2 on HDC display (Figure 4, Item 2) by selecting CHANGE POSITION button (Figure 4, Item 4)
on HDC control box.
1
2
3
4
5
T01106HDC
Figure 4. Hydraulic Diagnostic Center (HDC) Control Box.
l.
Stop engine; relieve hydraulic pressure.