TM 5-2350-378-23&P
0028
REMOVAL
WARNING
Ensure that vehicle power is off and battery disconnected. Remove all jewelry, such as rings,
dog tags, bracelets, etc. If jewelry or disconnected battery ground cable contacts battery
positive terminal, a direct short will result, causing instant heating of tools, tool damage,
battery damage, or battery explosion. Failure to comply may result in severe injury or death.
1.
Remove two machine bolts (Figure 1, Item 2), washers (Figure 1, Item 1), and disconnect bracket
(Figure 1, Item 9) from bulkhead. Discard machine bolts.
2.
Disconnect circuit 1070 and circuit 10 (Figure 1, Items 3 and 4) from Hydraulic Diagnostic Center (HDC) circuit
breaker (Figure 1, Item 7).
3.
Remove two nuts (Figure 1, Item 5), lockwashers (Figure 1, Item 6), screws (Figure 1, Item 8), and HDC circuit
breaker (Figure 1, Item 7) from HDC disconnect bracket (Figure 1, Item 9). Discard lockwashers.
4
5
6
7
3
8
2
1
9
M0006HDC
Figure 1. Hydraulic Diagnostic Center (HDC) Circuit Breaker Removal.
END OF TASK
03/15/2011Rel(1.8)root(maintwp)wpno(M00004)
