TM 5-2350-378-23&P
0031
REMOVAL - Continued
5.
Remove dust cap (Figure 3, Item 4), four screws (Figure 3, Item 3), nutplate (Figure 3, Item 1), and wiring
harness W2 connector J1 (Figure 3, Item 2) from HDC disconnect bracket (Figure 3, Item 5).
6.
Cut and remove tie down straps, pull leads through wire clamps, and remove wiring harness from vehicle.
Discard tie down straps.
1
2
3
5
4
M0014HDC
Figure 3.
Wiring Harness W2 Connector J1 at Disconnect Bracket Removal.
END OF TASK
03/15/2011Rel(1.8)root(maintwp)wpno(M00006)